Cateye ABS-10 Bedienerhandbuch PDF herunterladen

Advanced Battery System

Ni-MH

ABS30UL-020807 066640036

Rechargeable Head Lamp

ABS-30

Instruction Manual

Standard Charging Time

3 hours

#533-8677

ABS Switch Unit

#533-8783

ABS Joint Cord

#533-8795

ABS Pad (for jack socket)

#533-8794

ABS Battery Charger

#533-8785

ABS Holder

#533-8780

Bracket (H-30)

#534-0588

ABS Lamp Body

#534-0582 10W

6V ABS Wide Bulb

#534-0587 20W

6V ABS Spot Bulb

#533-8784

ABS Battery Belt

#533-8790

ABS Battery Pack

SAFE OPERATIONS (IMPORTANT)

•Never short-circuit the terminal of the battery pack and the plug of the battery

charger. It may cause the battery to over heat, resulting in fire or damage of the

components.

•Securely connect the plugs and belts so that the light will not turn off while riding,

or the cord will not hinder riding.

•Never use the ABS if the cord of the battery charger or the switch unit is dam-

aged, Consult with the shop where this lamp kit was purchased.

• The lamp body becomes extremely hot when turned on. Never touch the lamp

body or the lens until thoroughly cooled. Injury may result.

• Use only the designated battery charger for charging.

• Safely and properly dispose of the old battery according to your local regulations when

it comes to the end of its useful life.

• This lamp kit is not intended for use by young children or infirm persons without super-

vision.

Young children should be supervised to ensure that they do not play with this appliance.

• As the unique characteristics of the rechargeable battery, the light output will remain

high just until the batteries run out and then drop suddenly. Take precautions against

such a situation or against a sudden blowout of the bulb, and prepare a spare light or

spare battery packs.

•A long period of non-use will lower the voltage of the battery due to natural self dis-

charge. Always charge the battery before using.

•Overdischarge (leaving the light on after the power is completely gone) shortens the

performance life of the battery.

• If the lamp body or parts become dirty with mud, etc., gently wipe it away with a dish

towel which is moistened with mild soap. Never apply paint thinner, benzine or alcohol;

damage will result.

READ ALL INSTRUCTIONS BEFORE FIRST USE

Thank you for

purchasing the CAT EYE ABS-30 Ad-

vanced Battery System, a unique 6 volt recharge-

able head lamp. ABS-30 is a combination system of

lamps, battery packs and charger. Before operating,

thoroughly familiarize yourself with this manual so

that you understand the light's safe and correct op-

eration. Please keep this manual, along with the war-

ranty card, for future reference.

NAMES

The ABS-30 is the combined

system of the following parts.

Make sure that your package in-

cludes all the parts.

BEFORE FIRST USE:

The factory-loaded battery pack

is not fully charged; the charge

is useful only for a short period

of time. Before first use, charge

the battery fully following the in-

structions on [HOW TO

CHARGE].

Important Note WARNING

Do not mix batteries that are in

different states of charge.

Connecting Battery Pack and Cord

Choose your favorite location to attach the battery packs.

When attaching with holder

Attach the holder onto the down tube using the holder mounting bolts.

Attention:

Fix the battery packs

securely with the hold-

down straps. For

safety's sake, also use

the battery belts

(velcro straps) to se-

cure the batteries.

Holder

Mounting Bolts

Holder

Velcro

Switch Unit

Lever

Rubber Pad

Quick lever screw

Lamp Unit

Bracket (H-30) x 2 Battery Charger

Battery Pack x 2

Battery Belt (Lx2/Sx2)

Switch Unit

Rubber Pad

Holder

Cable Cover

Joint Cord

Holder Mounting Bolts

Attention:

If the cable is not covered by cable

housing, use the included cable

cover to prevent direct contact be-

tween the cable and the belts.

Note: You can use only one bat-

tery pack. In this case, the run time

becomes half of the designated time.

How to run the battery belt

through the slot

Strap

Battery Pack

Battery Belt

Frame

Ring

Battery pack

Velcro

Cable Cover

Cable

Top Tube

Connecting Cord

Plug

Pad

When attaching to frame

Fix the battery pack firmly to the frame, using the battery belts.

Switch Unit

Jack

Relay Jack

Joint Cord

Cord Belt

Relay Plug

SAFETY SYSTEM (AUTO-RESET FUSE)

When an electrical surge or malfunction occurs in the circuit or the temperature of

the battery rises, the fuse blows due to its safety system and the circuit will be

closed. After leaving it for a while, the fuse will automatically recover.

Note: If the fuse continues to blow, or if the fuse does not recover, call the

appropriate service center for assistance.

SPECIFICATIONS

Bulb: 6V Halogen 20W spot bulb + 10W wide bulb

Battery pack: Hi Ni-MH battery Hi Ni-MH/6V 3000mAh

Battery charger: Hi Ni-MH charger (fast) QCHR-3010

Temperature range: Charging: 0°C - 40°C Operating: –15°C - 45°C

Recharge/discharge number of times:

about 500 times (until the rated capacity drops to 50%)

* The specifications and design are subject to change without notice.

LIMITED WARRANTY

2-Year Warranty: Only for Lamp unit, switch unit, battery pack and charger

(excluding bulb and deteriorated battery)

If trouble or damage occurs during normal use, the product will be repaired or replaced free of

charge. Type your name, address, date of purchase and the situation of trouble clearly on the

warranty certificate, and send it back to the appropriate service center together with the prod-

uct. Insurance, handling and transportation charges shall be borne by the customer. After

being repaired or replaced, the product will be shipped back to the customer.

Address for service:

2-8-25 Kuwazu, Higashi Sumiyoshi-ku Osaka 546-0041 JAPAN

Attention: CAT EYE International Customer Service Section

Service Center for the United States Customers

CATEYE Service & Research Center

1705 14th Street #115, Boulder, CO 80302

Phone: 303-443-4595 Fax: 303-473-0006 Toll Free: 800-5CATEYE (800-522-8393)

e-mail: ser[email protected] web site: www.cateye.com

HOW TO SWITCH ON/OFF

The switch unit controls the operation of the lamps.

Yellow button ------ switches on/off the yellow plug side.

Gray button --------- switches on/off the gray plug side.

BEAM Spot Beam (20W) Wide Beam (10W) Spot + Wide

RUN TIME 1.5 hrs 3.0 hrs 1.0 hr

Note: The run time shown here is the calculated figure. (When two battery packs are used.)

Adjust the angle of the beam downward so that it will not dazzle the oncoming traffic.

The light can also be adjusted 10° horizontally. To do so, raise the quick lever.

HOW TO SETUP

Attach the brackets (H-30 x 2 pieces) to the

handlebar. Turn over the quick lever and it is fas-

tened.

Slide the lamp units onto the brackets. To remove

the lamp body, slide it forward while pushing the

lever.

Attention: When removing the lamp body,

make sure that it has been

cooled.

How to distinguish the spot bulb from the

wide bulb: the inside reflective mirror of the

spot bulb is more finely cut.

Attach the switch unit onto the handlebar where

it will not hinder the braking and shifting opera-

tion.

Connect the battery packs, joint cord and the switch

unit as illustrated. If you are using only one battery

pack, connect the relay plug directly to the battery pack.

Caution:

• Secure the cord along the frame with the cord belt,

so that it will not hinder riding.

• Wind the cord round the frame so that it will

not hinder riding. Securely connect the jacks

to the plug.

RECHARGING INSTRUCTIONS

Caution:

• Use only the exclusive charger.

• For indoor use only.

• The battery charger becomes very hot

when charging. Be careful not to get

burned.

Note:

• When the charging is finished, the indicator

turns from red to green.

• Depending on the use environment, the

charging time will vary.

If the batteries do not serve proper run time

even if they are correctly charged, it means

they are at the end of the useful life.

• Do not use two 20W bulbs simulta-

neously.

HOW TO REPLACE THE BULB

Disassemble the lamp unit as illustrated.

Caution:

• Do not rotate the bulb but pull it straight out.

• When replacing the bulb, be sure that the

bulb and the lamp unit have thoroughly

cooled.

• Use only the CAT EYE 6V halogen bulb.

• Do not use two 20W bulbs simultaneously.

Do not mix batteries that are in

different states of charge.

.,LTD.

Battery Pack

Bracket (H-30)

Attention:

There is a pad inside of the jack

socket to prevent the plug from fall-

ing off the socket. When this pad is

deteriorated and you feel the plug's

connection is loose, replace the pad

with a new one.

Quick release lever

Release

• Recharge the battery packs after they become completely empty.

• Recharge two battery packs simultaneously. You cannot re-

charge a single pack alone.

The home power outlet

Charge indicator

Bulb

Open

Cloas

* Do not use two 20W bulbs simultaneously.

CLICK!

Fit inside

Wind straps

1 2

Rechargeable Head Lamp 1
3 HEURES 2

Inhaltsverzeichnis

Seite 1 - Rechargeable Head Lamp

Seite 2 - 3 HEURES

Weitere Dokumente für Fahrradzubehör Cateye ABS-10

Um das Dokument anzuzeigen Cateye ABS-10 Bedienerhandbuch

Cateye ABS-10 Bedienerhandbuch (1 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Cateye ABS-10 Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Fahrradzubehör Cateye ABS-10 herunter. Cateye ABS-10 Instruction manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Fahrradzubehör Cateye ABS-10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fahrradzubehör Cateye ABS-10